Buy Mitomo True ND filters on stock in Europe
Buy Mitomo True ND filters on stock in Europe

TrueND 0.3 - TrueND 0.6 - TrueND 0.9 - TrueND 1.2 - TrueND 1.5 TrueND 1.8 - TrueND 2.1

TrueND 2.4 available now.

1 x True ND 4 x 5.65 = 540 euro each.
Set of 7 x TrueND 4 x 5.65 = 3690 euro. (0.3 to 2.1)

New available in 4x5.6 is TrueND 2.4

1 x True ND 6.6 x 6.6 = 725 euro each.
Set of 7 x TrueND 6.6 x 6.6 = 5000 euro. (0.3 to 2.1)

Prices in euro may change anytime, due to fluctuation between EUR - USD
Each filter comes in a filter pouch

Mitomo TrueND filters on stock in all densities.
Filters are shipped FOB from Netherlands, shipping with your own courier or at extra cost.

Cameramarket.eu is official TrueND dealer for Europe.
https://www.mitomo.co.jp/products/nd-filter-true-nd-en


... more information

Set of 7 in 4x5.6 = 3690 euro

Pictures on request
 
Indieassist IALT - HD for Arricam LT
Indieassist IALT - HD for Arricam LT

New build HD video assist for Arricam LT, modern outputs.

IndieAssist mounts directly on the fixing position of the original Arricam LT assist.
With the same dimensions, but with nowadays HD quality and modern outputs,
with global shutter / HDSDI / 12 stops DR

The Indie Assist unit can be set to 4:3 when shooting in 4perf mode
or to 16:9 when shooting in 3 or 2 perf.
This is set internally and can be changed by a technician when changing movement.

Technical specifications:


... more information

14950,- euro

 
Indieassist IA416 - HD for Arri 416 camera
Indieassist IA416 - HD for Arri 416 camera

New build HD video assist for Arri416 16mm film camera with modern outputs.

IndieAssist mounts directly on the fixing position of the original Arri 416 assist.
A bit bigger the the original SD - IVS, but with nowadays HD quality and modern outputs,
with global shutter / HDSDI / 12 stops DR

Technical specifications:


... more information

14950,- euro

Pictures on request
 
Indieassist IA435 - HD for Arri 435 camera
Indieassist IA435 - HD for Arri 435 camera

Available now:

New build HD Indieassist for 35mm Arri 435 film camera.
Same features as the LT Indieassist.

The IA435 will not fit on the 435Extreme due to the FEM-2 cover with motor outputs.
it fits on existing mounting points and is a very strong, rugged system capable of any type camera handling as often happens with the 435 camera.


... more information

14950,- euro

Pictures on request
 
Indieassist Overlaybox - OLB
Indieassist Overlaybox - OLB
The OLB works with all IndieAssist type units.
There is a firmware update of the indieASSIST unit itself required to control the box.

The overlay box has these features:

Exposed film counter onscreen
Shutter angle onscreen
Advanced framelines
Anamorphic image desqueeze 2x / 1.8x / 1.5x / 1.3x
REC/RUN indicator
CAM identifier
Convert framerates to 24p output
Fps notification onscreen

3500,- euro

Pictures on request
 
Upgrade Indieassist IALT to Mk3
Upgrade Indieassist IALT to Mk3
Contact for price!
Pictures on request
 
IndieAssist for Arri 235
IndieAssist for Arri 235

IndieAssist for Arri 235 - IA235 is ready soon. It will fit any 235 without work needed on the body just as with all other IndieAssist units.


14950,- euro

Pictures on request
 
New Aaton XTR magazine belts for sale
New Aaton XTR magazine belts for sale

New produced Aaton XTR magazine drive belts.

Following Aaton specs the belts fit perfect and are as silent as the original ones.
With a kevlar core these belts are very strong and durable.

35,- euro each
100,- euro for 3 x belts
150,- euro for 5 x belts


35,- euro each

 
Eelcon Flash Image control system
Eelcon Flash Image control system

The EELCON shadow control system

The EELCON is a compact and lightweight solution in creative image shadow control. Increase the shadow detail of your image with colour but without the introduction of noise by using Burning Eye’s next generation on-set flashing solution.

Illuminated Filter Stage

Our system is based on an illuminated filter stage equipped with a special manufactured EELCON filter by Tiffen. The stage is compatible with existing ARRI LMB Clamp Adapters, which makes the EELCON ideal for handheld, gimbal and Steadicam applications. You can place additional 4x4 or 4x5,65” size filters in front of the EELCON by placing a clamp-on LMB 4x5 module (or single filter stage) on to the illuminated filter stage. 

RGBWW LEDs

The Tiffen EELCON filter is illuminated by precision adjustable film grade RGBWW LEDs. The high colour rendering CRI 95+ white lights are colour temperature adjustable from 2700 to 6500 Kelvin. Combined with the (wide gamut) colour elements there is a lot of creative pre-flash freedom at your disposal. The EELCON is flicker free, which makes the system suitable for high-speed camera work.

EELCON LED Control Box

Altering the flash level on the system requires an EELCON LED Control Box. The manual interface has 6 turn knobs, one for each colour and a master control. For more advanced lighting effects there is the possibility to use the 10 channels addressable DMX-input, which accepts DMX512 control commands.

Wikipedia on Image flashing: https://en.wikipedia.org/wiki/Flashing_(cinematography)

The system functions as a modern Varicon, using a special filter to lift the shadows in any desired color.


... more information

5500,- euro

Pictures on request
 
Hybris - Magnet-based shock absorber camera platform.
Hybris - Magnet-based shock absorber camera platform.

What is the Hybris?
It is a custom designed and magnet-based shock absorber to reduce high and low frequency vibrations and hard impact shocks. Those are typically experienced when shooting from moving platforms on rough terrain or paved roads. 

What makes the Hybris special and unique? A new damping experience!
A finely balanced and adjustable linear eddy current brake (magnets) and spring system gives you a stable platform from which to shoot. The fact that it operates without contact means it is wear-free and unaffected by weather conditions. 

Due to the eddy current break characteristics the Hybris system starts already to react in a range of millimeters when minimum position changes occur. Significant changes in position and speed leads to a movement delay of the shock absorber which provoke that the image of the camera is stable. 

The Hybris allows a spring range of 46 cm and a payload between 1-40kg (without applying any additional weights to the system). 

Moreover, the use of microcontrollers enables a high precision damping fine tuning and can be controlled manually or via Hybris App (Bluetooth).

The front mount can be set for under or over slung, use of any camera, gimbal or stabilized head.

Therefore, the Hybris achieves the optimum position for the perfect shot.

 

Hybris :                                                           https://www.youtube.com/watch?v=jkJVINLZIWQ   

                                                                        https://www.youtube.com/watch?v=L90nx0Zn7Vk

The VacuMount

A lightweight, resistant, and ultra-flexible active vacuum mounting platform that delivers a multitude of rigging possibilities with ultimate functionality. The VacuMount system is ideal for mounting cameras, gimbals, camera heads, lights or other accessories on all smooth surfaces such as windows, cars, walls etc.! With the C3 VacuMount System you can take shots with the camera directed at the driver from the front of a car (off the hood), or from the side of a car - the C3 System covers these applications entirely. The C3 can be used as a single mounting system, or as addition with further C3, or the C1 VacuMounts for a bigger rigging. (see attachment) The VacuMount is a modular system and can be ordered piece by piece or as a complete package (VacuMount System Kit – 3988,-€). You can supply by one control unit (pump) 6 suction cups (2x C3 or 1xC3+3xC1).

VacuMount Videos:

Rigging within seconds:                             https://www.youtube.com/watch?v=7goUAlUXfdw        

VacuMount meets Formula 1:                  https://www.youtube.com/edit?o=U&video_id=Gk4e6Bw6hdc      

Rigging in Realtime:                                    https://www.youtube.com/edit?o=U&video_id=dpKS1UIqQ88       

Video of a Spanish customer:                   https://www.youtube.com/watch?v=91UfcJ1fejc     

 

Some more impressions under:             https://www.facebook.com/idea.vision.gmbh/


... more information
Contact for price!
Pictures on request
 
Steel shims for Zeiss, Angenieux and Cooke lenses
Steel shims for Zeiss, Angenieux and Cooke lenses

Steel shims for Zeiss, Angenieux and Cooke lenses

These precision shims are made of stainless steel, there is only a margin error of 2 microns.
Sizes are readable for easy recognition. Pack of 10 of the same size: 75,-

Product numbers per shim you can find in the pdf file, left bottom of this page.

Zeiss PL steel shims

Angenieux Optimo 24-290,
Optimo 28-76, Optimo 15-40, Optimo 17-80,
Angenieux Rouge DP 16-42 / 30-80 / 45-120

Cooke S4i/S5i shims only available in .0005i / .00127m


... more information
Contact for price!
Pictures on request
 
Bright Tangerine matteboxes for sale
Bright Tangerine matteboxes for sale

Bright Tangerine matteboxes for sale.

Strummer DNA, Viv, Misfit, Misfit Atom and others for sale.
Items are new, mint condition.

New in the box with guarantuee.


... more information
Contact for price!
Pictures on request
 
Lens projector set up
Lens projector set up

Lens projector set up on ceiling, for easy handling of the lens projector.

Floor is free of rail, easy to walk around the projector.
Set up is custom made, with given measurements.

Rail and dolly package for sale without the projector.

Ceiling attachments are included.


Contact for price!
Pictures on request