Steel shims for Zeiss, Angenieux and RED (RPP) lenses

These precision shims are made of stainless steel, there is only a margin error of 2 microns.
Sizes are readable for easy recognition.
Zeiss steel shims:
Pack of 10 of the same size: 35,- euro,
Pack of 7 different sizes available for 39,- euro,
100 shims any size in packs of 10 for 290,- euro

RED Pro Primes & Angenieux Optimo 24-290,
Optimo 28-76, Optimo 15-40, Optimo 17-80.

10 shims 39,- euro, 7 shims 43,- euro, 100 shims 325,- euro

0.0125mm = 0.0005" 0.025mm = 0.001" 0.038mm = 0.0015" 0.05mm = 0.002"
0.075mm = 0.003"
0.1mm = 0.004"
0.125mm = 0.005"

Egripment Piccolo crane, with platform and extension for Hothead, 2 seats + risers, 30 Egripment counter weights.

Good condition.

Ex-rental, more pictures available. Priced to sell!

PantherIII dolly plus accesories as: Sliding U-Banghi, Snake, 2 extra Panther batteries + charger.

Good condition.

Ex-rental, more pictures available. Contact for prices

Panther Superjib1 to be used on the Panther Dolly.

Good condition

Ex-rental, more pictures available. Priced to sell!

Egripment Hothead1 build by Kaleidoscope UK, with lots of accesories. Wheels and joystick, 100+ meter driver cable, lots of other cables, videounit, batteries.

Good condition.

Ex-rental, more pictures available. Contact for prices

Egripment Hothead2, plus wheels, cables and accesories

Good condition.

Ex-rental, more pictures available. Contact for prices

Dario Dolly with accesories:

Acc:
2 sideboards, 1 frontboard
1 small frontboard hi/low
2 seats, 2 seatrisers
1 L-bracket, 1 outrigger
Pushbar

Good condition.

Ex-rental, more pictures available. Contact for prices

Magnum dolly with one telescopic bazoka, 2 side boards, set of standard wheels, set of studio wheels, one euro adapter bowl mount, one seat

- Chrosziel FOX remote focus systeem with FMG6-motor. One channel transmitter and receiver with on/off.
- Frequency: 433.900 - 434.650 Mhz ( 14 channels )
- 2 new batteries and 2 chargers
- Motorbracket for Heden and extension unit rods 19mm, 15mm, Panavision
- Bracket for transmitter
- Gear film, canon, fujinon 0,6 and 0,4
- 12 scale rings
- cables for Arri, Aaton, video, open xlr, hi-rose
- motorcables for FMG6 motor and Heden motor.
- Pelicase 1520

Privately owned, Used condition, Motor needs to be replaced.

Contact for pictures and prices

Cartoni Dutch head in very good condition

ex-rental

Contact for pictures and prices

S-3 Arri Handheld set in very good condition

ex-rental

Contact for pictures and prices

P+S wedge in very good condition

ex-rental

Contact for pictures and prices

GFM 9 crane with Stanton Jimmy Jib remote head

2 piece video-assist, used for SR. No cable.

Make an offer.

PROJECTOR lens in good condition

7m80 platform-height, payload 250kg
11m80 remotehead, payload 80kg

including for platform-operating: Two seats with belt, all seatarm-extentions and risers, camera-riser, 150mm bowl, 3 way-leveler mitchel, two sidetable's for batteries.

including for remotehead-operating: Longneck-nose (galg-Bracket), short-nose-bracket.

Overall including: Trackingwheels, 4* Car-Jack-Levelers, Horizontal-bracing to increase sideway-stability, Monitor-bracket, counterweights are fitted in wooden boxes (14 boxes with 5 weights each), transport-dolly for counterweightboxes, protectioncaps for all arm-part-ends. All parts are or fitted in flightcases or boxes.

It's all fitted in a very nice recent 3 tons trailer, ready to roll, and shoot.

FF2 Follow focus for use on 19mm bars. Can be changed to 15mm.

Ex-rental, good condition.

6 x 6 / Tiffen

• LC3
• Fog2 / Fog 3

Series 9 / Tiffen

• 85 / 85B / 85C
• 85 / 85B
• CC30M

3 x 3 / Tiffen

• 85 / 85B / 85BN3 / 85BN6
• 80B / 80C / 85
• 81A / 81B / 81C / 81D
• Fog1 / Fog2 / Fog5

93 mm / Tiffen

• 85 / 85N3
• 85 / 85B

4 x 4 / Formatt

• Coral4 / Coral5 / Coral6

Series9 / Formatt

• 85 / 85N6 / 85N9

SR GG 1.78 with TVsafe S16

SR GG 1.33 TV Normal16

Several Arri 3 doors, viewfinders, mag spare parts

For use on 19mm bars, 2 x 2 trays
Top, 2 x sideflags, Masks
and the french flag holder.
No rear doughnut

Contact for prices

Good condition, ex-rental, in case.

Lowcost, lightweight dolly for minor adjustments and 45 degree stairs shots without a crane!

The TwinDolly can be used on your own trilights/truss or on regular alu-tubes or speedrail. When using our TwinTube or BarTruss there is no limitation in length. The joints are bump-free, quarantee for a smooth ride.

The TwinDolly can be equipped with a moy-base, boss-plate, 100- and 150mm-bowl-fitting

Contact for more information and prices.

Brand new, straight from the factory. Shipping worldwide

BarTrack is an aluminium precision track
designed for a smooth ride.
Stainless steel, precision milled joints. BarTrack is lightweight and cannot rust. Because the surface is an integral part of the metal, it will never chip, crack or peel.

Available in 1 mtr (3 feet), 2 mtr (6 feet) and 3 mtr (9 feet). Other sizes on request.

Four circles are standard available, extra small (332cm-4x), small (510cm-8x), medium (802cm-12x), large (1070cm-16x) diameters.

Contact for more information and prices.

Brand new, straight from the factory. Shipping worldwide